Back to JTB SSMPropEditor.
- 2024-11-30 - version 2024.11.0 download
- The whole folder structure is exported instead of just the parent folder.
- Tooltip for sheets improved and bugs fixed.
- Tooltip on various buttons improved.
- 2024-10-25 - version 2024.10.0 download
- Fixed: Expected path changes not saved.
- Updated link for the JTB SSMPropEditor documentation.
- 2024-09-27 - version 2024.9.0 download
- If you select one or more properties and don’t use checkboxes it is now possible to use copy properties button.
- Sheet tooltip improved to show views also for sheets missing the DWG.
- Other minor fixes.
- 2024-08-31 - version 2024.8.0 download
- Bug fix: Sorting by sheet number giving unexpected results.
- Paste sheet count improved and bugs fixed.
- Improved way to enter license activation key.
- Fixed empty tree view bug when no views exist.
- Fixed import bug.
- 2024-07-18 - version 2024.7.0 download
- Timeout for layout renaming increased to 5 minutes for cases with very large DWG files.
- Empty treeview of sheets bug fixed.
- Improved Recent Sheet Sets with remove option of non-existing Sheet Sets.
- Layout renaming bugs fixed.
- File Name renaming bugs fixed.
- Import bugs fixed.
- 2024-06-24 - version 2024.6.1 download
- Layout renaming bugs fixed.
- File Name renaming bugs fixed.
- 2024-06-02 - version 2024.6.0 download
- Sheet indexing. If no sheet is selected Sheet Number is default.
- Sheet indexing bug fixed.
- Fixed empty tree view (the left pane with sheets) that could happen in rare cases.
- Removed Show Properties as it no longer is needed.
- Improved dialog boxes when closing and exiting.
- 2024-03-27 - version 2024.3.0 download
- Added support for AutoCAD 2025.
- Find and Replace improved in many ways and some bugs fixed.
- Sorting of sheets improved and some bugs fixed.
- Drag and drop sheets improved and bugs fixed.
- Sheet indexing bugs fixed.
- Callout blocks dialog box improved.
- Layout renaming bug fixed.
- Tooltip for sheets improved.
- License Activation required to upgrade to this version. Free upgrade if purchased within last two years.
- 2024-01-13 - version 2024.1.1 download
- Found path bug fixed.
- Failure to use certain Sheet Set files (edited by BricsCAD) fixed. Test for non-existent propname added.
- 2024-01-08 - version 2024.1.0 download
- Find and Replace using Selected properties bug fixed.
- Fixed exception bug when "show internal paths" is unchecked.
- 2023-12-22 - version 2023.12.0 download
- Several Find and Replace dialog bugs fixed.
- Performance bug fixed while opening and operating certain Sheet Sets with no existing UNC paths.
- Bugs fixed related to renaming of actual DWG files.
- Import bug fixed for renaming and sheet number issue with extra space added.
- Selecting one or more properties and don’t use checkboxes, it's now possible to use copy to clipboard.
- Added tool tip to Recent Sheet Sets that shows the folder of the Sheet Set.
- Tool tips added for QAT buttons.
- Sheet Tool Tips has more info.
- Close a Sheet Set showing "Do you want to save the changes to the Sheet Set?" adds a Cancel button and fixes a bug where No still saved changes.
- Exit the app may show "Do you want to close JTB SSMPropEditor?". Cancel button has been added.
- "Use Show Properties" checkbox now retains its setting.
- Bug fixed where backup settings is not saved and restored.
- Height of Sheet Set and project control areas increased a bit so the vertical scrollbar is not showed by default.
- Backup of renamed or moved DWG files copied to %temp% folder as an extra precaution.
- 2023-06-19 - version 2023.6.0 download
- File menu now resizable.
- New tooltips while hovering over sheets.
- Improved colors so it is easier to read text that is edited.
- Fixed callout block bugs.
- Other minor bug fixes.
- 2023-03-28 - version 2023.3.0 download
- Added support for AutoCAD 2024.
- Performance issues fixed.
- Vault performance issues fixed.
- Fixed bug where sorting was not saved as expected.
- Fixed import bugs.
- Other minor bug fixes.
- 2023-01-30 - version 2023.1.0 download
- New backup options available.
- Icon indicating if sheet is missing.
- Fixed import bugs.
- Fixed callout block bugs.
- Fixed layout rename bugs.
- Drag and drop sheets bug fixed.
- Fixed bugs where layout name change was reverted.
- Improved error handling where DWG file is missing.
- Other minor adjustments.
- License Activation required to upgrade to this version. Free upgrade if purchased within 2 last years.
- 2022-04-25 - version 2022.4.0 download
- Fixed bugs related to rename of file name and layout both within the app and when importing.
- Add handling of ignoring empty rows in imported Excel file.
- Corrected handling of DST icon in Explorer.
- 2022-03-31 - version 2022.3.1 download
- Added support for AutoCAD 2023.
- 2022-03-30 - version 2022.3.0 download
- Fixed bug when importing from Excel where empty paths are not applied to be empty as expected.
- 2022-02-26 - version 2022.2.0 download
- Fixed bug when importing from Excel where the Full Path is not being updated.
- Allow import from Excel file that is read-only or in use.
- 2021-12-22 - version 2021.12.0 download
- Fixed bug when importing and having empty properties. Now non-breaking space is used to avoid ---- showing when used in fields.
- Fixed rename message bug.
- 2021-10-25 - version 2021.10.1 download
- Fixed bug where Vault is showing on the Ribbon when it should not.
- 2021-10-20 - version 2021.10.0 download
- License Activation fix.
- 2021-09-12 - version 2021.9.0 download
- License Activation fix.
- 2021-08-23 - version 2021.8.0 download
- Find and Replace performance improved.
- Find and Replace bugs fixed.
- 2021-07-16 - version 2021.7.0 download
- Layout renaming when importing fixed.
- 2021-06-21 - version 2021.6.1 download
- Sheet Title editing bug fixed.
- Layout renaming improved.
- Layout renaming bug fixed.
- 2021-06-01 - version 2021.6.0 download
- Performance improvements.
- AutoCAD 2022 support added.
- Layout renaming bug fixed.
- Vault Invalid Path Directory bug fixed.
- License Activation required to upgrade to this version. Free upgrade if purchased within 2 last years.
- 2020-09-26 - version 2020.9.0 download
- More editing functionality for Label block for views, Callout blocks, Page setup overrides file, Sheet storage location and Sheet creation template.
- Silent command line installation is now also uninstalling previous version unattended.
- Chinese localization.
- Graphical issues fixed that could happen in some systems due to text scaling and DPI.
- 2020-07-05 - version 7.5.0 download
- Upgraded to JTB License 4.3.0.1
- Licensing update with encryption compliant with Federal Information Processing Standards(FIPS).
- Bug fix for network licenses where Unknown could show as PC name in the License Server Dashboard.
- 2020-06-18 - version 7.4.4 download
- Fixed bug with Lock/Unlock button.
- 2020-06-15 - version 7.4.3 download
- Updated licensing functionality.
- 2020-05-23 - version 7.4.2 download
- Fixed Vault connection issue.
- Updated licensing functionality.
- 2020-05-02 - version 7.4.1 download
- Fixed silent install issue.
- 2020-04-24 - version 7.4.0 download
- AutoCAD 2021 supported.
- Vault 2021 is by default supported. Contact us for other versions to be supported.
- Fixed oversized icon on the AutoCAD Ribbon that happened to one customer.
- Installs for AutoCAD in ProgramData to allow one user to install and another user to use the app from within AutoCAD.
- Fixed silent install issue.
- .NET Framework 4.7.2 or newer needed.
- 2019-09-01 - version 7.3.1 download
- Fixed a bug that could cause path to sheet being deleted.
- Fixed a bug that could cause file missing problems after importing.
- 2019-08-19 - version 7.3 download
- Added ability to drag and drop sheets or subsets in the tree view.
- Fixed "Edit with SSMPropEditor" in Explorer.
- Sheet Creation template path can be edited.
- Relative path can be edited.
- Added ability to install silently and specify license server.
- If one or more sheets are missing custom sheet properties they can now be copied from another sheet that has them. This can be the case with ProjectWise and DMS Location and SheetID.
- Fixed a bug related to being installed as app for AutoCAD 2020.
- Fixed problem with changes being saved in some situations.
- Fixed some sorting bugs.
- Fixed increment bug that caused increments of 2 instead of 1 as expected.
- Allow editing sheet number and/or name to fix problem if two are named the same already.
- 2019-03-28 - version 7.2 update download
- Added support for AutoCAD 2020
- 2019-02-18 - version 7.2
- Fixed a problem to drag and drop a DST file into the app.
- 2019-02-01 - version 7.1 download
- Performance enhancements for renaming of actual layout names
- Added Edit with SSMPropEditor when right clicking on a DST file in Explorer
- Merged installer for Windows and Autodesk app
- Installer allows user to select installation location
- Fixed problem with renaming of actual layout name that could happen in some cases causing the app to hang
- Import problems fixed that could cause sheet numbers missing
- Fixed import problems when a property includes the ‘ character
- Copy and paste problem fixed
- UI glitches fixed
- Fixed a problem with Windows scaling of 125% or more
- Various improvements and fixes
- 2018-11-19 - version 7.0 download
- New licensing system being used, network licenses are available
- UI glitches fixed
- Fixed a problem where sorting were not saved in some cases
- Fixed a problem where the sheet title and number was not saved when changed
- Fixed a problem with sheet indexing that could cause erroneous result
- Fixed some export/import problems
- Fixed problem to copy and paste between sheet sets
- Fixed a problem with renaming of sheet file name
- Fixed problems with paths not showing correctly for properties Label block for views, Callout blocks and Page setup overrides file
- Fixed issue when a property includes the character ‘ causing problems with import and export
- Fixed a problem that did not update 'Include for Publish', after importing from text or Excel
- Improvements in the UI to show more properties when possible on screens with large resolution
- UI fixes for the Ribbon where in some cases the lower buttons could not be seen fully
-
Fixed problem to export and/or import to/from Excel in some cases
-
Fixed some problems related to Vault. Still waiting for Autodesk's help for some issues
-
Minor bug fix with Sheet indexing showing an error even though it was no error
-
Fixed a problem with Windows scaling of 125% or more
- Various performance improvements
- 2017-03-21 - version 6.4 update download
- Added Autodesk® AutoCAD® 2018 support.
- 2017-01-20 - version 6.4
- Export and Import to Excel files does not require Excel to be installed. This makes it work with other software that can edit XLSX files
- Natural sorting implemented for sorting of sheets in the tree view. Before it was for example sorted like S-001, S-1001, S-101 but now as S-001, S-101, S-1001
- Fixed a problem with renaming of actual Layout name when "Rename Layout in drawing" checkbox is used in Options. In some cases the layout could not be renamed as expected
- Fixed problem that sorting not always was saved as expected
- Fixed problem with selection of multiple sheets in the tree view that sometimes failed to work as expected
- Fixed problem with Sheet Indexing not working for the Layout property
- Fixed problem with Find and Replace not working in some cases
- Fixed some problems related to Vault
- Fixed some performance issues
- Other minor fixes
- Version 6.3 was not released to the public
- 2016-03-01 - version 6.2
- Fixed a problem changing language that was introduced in version 6.1
- Fixed a problem where using copy and paste did cause the right pane to be empty
- Fixed a problem where using copy and paste did caused collapsed and expanded subsets to change state
- Fixed a problem when importing Excel files in certain cases could cause issues with paths and renaming of dwg files.
- Improvement of performance in some cases when paths to dwg files are not found.
- 2016-01-21 - version 6.1
- One installer for 32-bit and 64-bit as well as for different languages.
- Fixed an issue in version 6.0 that could cause problems if an earlier version was installed.
- Makes SSMPropEditor to use the last run version of AutoCAD if multiple versions of AutoCAD are installed.
- Handle non existing UNC paths by giving the user the choice to ignore these paths during the remainder of the session and giving the recommendation to fix the paths if there's a need for it.
- Solved some bugs when copying properties and then pasting them that could result in the order of the sheet custom properties to be changed.
- Solved a bug where the Sheet Set file is automatically saved during copy/paste of properties.
- Cleared the pasting issue that resulted in empty grids on the right side.
- Solved a problem related to Sheet Set created in ProjectWise.
- Performance improvement.
- 2015-12-01 - version 6.0
- SSMPropEditor saves the DST in more compressed way than before making the DST file smaller.
- .NET Framework 4.5.1 needed
- New properties can be added when copying from one sheet set to another
- Autodesk Vault support added (first release for this functionality so start testing against a Sheet Set copy)
- Sort option added to tree view right click menu so sorting can be done by either sheet number and sheet title or only sheet title
- Correct how sheet is named in tree view when sheet number is not used
- Fixed a sorting issue for the tree view
- Fixed an issue when a sheet set contains & in the name
- Fixed an issue causing error during saving
- Find and Replace has been improved, with better performance and got some bugs fixed
- Fixed an issue where the tree view scroll to top
- Fixed an issue when using select all
- Fixed issue during import
- As well as other minor fixes
- 2015-03-18 - version 5.2
- Find & Replace of property text has been added.
- Added possibility to rename the actual layout name on drawings.
- Added two new buttons to check or uncheck all properties when the Selection column is used.
- Added sorting of sheets to the right click menu in the tree view area.
- Visual Studio 2012 Light theme added.
- Fixed problem with broken sheet view numbers, titles, scales on callouts after certain changes have been done in SSMPropEditor.
- Bug fixed: After incrementing sheet numbers the tree view is not updated.
- This bug has been fixed: Select multiple sheets and use increment value on the sheet number and it is not updated in the tree view. To see the change, save, close and open the Sheet Set.
- Several other minor or odd bugs have been fixed.
- 2014-03-02 - version 5.1
- Added Polish language.
- 30-day trial added without need to request a trial license.
- Added ability to drag and drop a DST file into SSMPropEditor to open the Sheet Set.
- Improved performance while exporting and importing to and from Excel.
- Added functionality to rename matching XML file when renaming sheets belonging to Project Navigator.
- Fixed bug when exporting sheets to Excel in non-English languages.
- Fixed a problem when importing from from Excel or text when French is used.
- Fixed a problem when exporting sheet set data and the sheet set title contained characters not allowed in file names.
- Fixed a problem where some custom sheet properties did not show up on the sheet set node.
- Fixed some language translation issues.
- Fixed bug: Export to Excel does not retain values with only a space or Alt+0160 (blank space).
- Solved a bug where the tree view structure (collapsed and expanded folders) was lost when pasting properties.
- Now it's possible to use Alt-Tab to activate SSMPropEditor while the Options dialog box is open.
- Fixed bug: If you right click on a sheet "Select all sheets in this subset" does not select all sheets.
- Updated installer for the Autodesk App version to support AutoCAD 2015 and verticals.
- 2013-03-10 - version 5.0
- Direct export/import to Excel. Export to Excel does not retain values with only a space or Alt+0160 (blank space or Non-break Space). A fix is available upon request.
- Export/Import Sheet Set properties added.
- Added localization for Italian.
- In Options dialog box language can be selected.
- Sheet Indexing lowest start number changed from 1 to 0.
- Bug fix with export/import to text file that could happen in some Windows languages/regional settings.
- UI style updates.
- Minor bug fixes.
- 2012-09-03 - version 4.6
- Added localization for Spanish and French.
- Bug with renaming of sheets when views are used fixed.
- Fixed UI problem when Windows is set to another text size (DPI) than 100%.
- Other bug fixes.
- 2012-04-03 - version 4.5
- Added compatibility for AutoCAD 2013.
- Start Sheet Set associated with the current drawing when started from AutoCAD.
- Start Sheet Set by specifying DST file as argument when running the SSMPropEditor.exe.
- Bug fixes.
- 2012-02-05 - version 4.4.2
- Tab movement settings is now saved as it should after restarting SSMPropEditor.
- Bug in SSMPropEditor that the grid is moved to left when checking the selection checkboxes.
- Bug fixed when importing from another location than where the DST is located.
- 2011-09-25 - version 4.4.1
- Fixed path issue with export.
- Fixed problem to remove some of the paths.
- Fixed browsing for sheet path.
- 2011-08-23 - version 4.4
- If copying properties from one sheet set to another any non-existing properties will be created.
- Added check for update making it possible to see if a newer version is available.
- Fixed a problem with single click on selection checkboxes.
- Fixed paste of new properties (sometimes it is needed to click on paste twice (to refresh) if the new properties does not show up directly)
- A few minor bug fixes.
- 2011-06-12 - version 4.3.3
- Made it possible to single click on selection checkboxes.
- Fixed a problem with import/export related to hard spaces.
- Added version to application title.
- 2011-05-12 - version 4.3.2
- AutoCAD 2012 based autoloader Plug-Ins support.
- Fixes a memory bloat issue that can happen under some circumstances.
- Fixes the issues in 4.3 and 4.3.1 related to relative path not working and file name being emptied.
- 2011-04-28 - version 4.3.1
- Fixed some issues that made right click open drawing and folder not working.
- Fixed a problem when sometimes AutoCAD shows that it does not find the sheet after making a change in SSMPropEditor.
- Fixed a problem with importing of txt file.
- Fixed a minor problem with recent sheet set list tooltip.
- Potential issues in this version:
- A couple customers have reported that the relative path is cleared after making changes to some properties in SSMPropEditor so that the sheets shows a question mark in SSM. To avoid the problem have "Use Show Properties" checked.
- 2011-04-11 - version 4.3
- Added tooltip to recent sheet set list.
- It is now possible to add just a space for properties to avoid the dots showing in AutoCAD.
- Possible to add spaces at the beginning and end of Sheet Indexing prefixes or suffixes.
- German translation.
- Bugs fixed:
- The tree view expansion/collapse is not restored in certain cases.
- Sheets with .DWG in capital letters are incorrectly showing with an extra .dwg suffix.
- Renaming and repathing/moving of the actual dwg files is not always working.
- Export is not working in some cases.
- Removed save dialog when unlocking or closing a sheet if no changes have been done.
- Some other minor issues.
- 2011-02-23 - version 4.2
- Added more abilities to control the paths to sheets. This affects renaming of sheet paths and also makes it possible to correct performance issues due to non existing paths.
- Added Options>Show found path.
- Added Options>Advanced: Show internal paths.
- Improved the treeview control that lists the sheets so it retains selection after applying changes.
- Bug fixed solving a problem copying properties between sheet sets during some circumstances.
- Saving glitches fixed.
- Known issues in this version:
- The tree view expansion/collapse is not restored in certain cases.
- Sheets with .DWG in capital letters are incorrectly showing with an extra .dwg suffix.
- Renaming and repathing of the actual dwg files is not always working.
- Export is not working in some cases.
- German translation not ready.
- 2010-10-08 - version 4.1.1
- German localization update.
- Bugs found after release of 4.1 fixed. The bugs are related to when using "renaming of actual .dwg file".
- 2010-09-27 - version 4.1
- Import of exported file. Making it possible to edit the exported file and import it back.
- Renaming of actual .dwg file. Available as an option.
- Change path of .dwg file and added browse button.
- UI improvements.
- Bug fixes.
- 2010-06-17 - version 4.0
- Indexing/renumbering functionality making it possible to renumber all or selected sheets in a sheet set
- Easy to add Sheet count to a property so you can have text on the drawing showing for example “Sheet 5 of 18”.
- File Path, File Name and File Layout is possible to edit on one or multiple sheets at a time.
- Performance improvements when selecting sheets in the tree view.
- Recent list have the option to delete not found shortcuts.
- Optionally use tab to move between property cells.
- Close of Sheet Set without closing the application.
- UI improvements.
- Bug fixes.
- 2009-05-21 - version 3.0.3
- There is a Ribbon, Application Menu, Quick Access Toolbar.
- Increment values. Think of revisions for example. Even if you have different revisions on different sheets they will be incremented individually. You can even use custom incremental series if needed for each Sheet Set.
- Sheet Set Properties and Sheet Set Custom Properties can be edited.
- An option to always have a backup of the Sheet Set DST file created whenever you open a Sheet Set.
- Disable ToolTips if you want.
- Choose if you want to show properties as soon as you make a selection in the tree view or if you want to show them when you press the button. The reason there is a manual way is that it is quicker if you make large selections of sheets.
- Copy properties from one sheet to one or many other sheets, even between sheet sets. Check the “Show Copy Checkboxes” checkbox first and then select what properties you want to copy and paste.
- There is a button allowing you to paste the Sheet count of the Sheet Set into the currently selected property.
- Export data to a format that you can use in Excel for example.
- Create reports that you can print.
- Access to previously opened Sheet Sets.
- Unlock/Lock button that let you release the lock of the Sheet Set so you can see changes directly in AutoCAD.
- Have changes applied automatically as an option.
- 2009-02-19 - version 2.2.0
- Localized to German. German page here.
- If the Sheet Set is locked you can open it Read Only in SSMPropEditor and if it is not locked SSMPropEditor will add a lock on it so you cannot modify it within AutoCAD even though you can open it. The aim is that it should play more nice with AutoCAD this way.
- A confirmation dialog have been removed to speed up the usage.
- Some bugs fixed.
- 2008-10-01 - version 2.1.0
- Not publicly released. More of a beta for 2.2.
- 2008-09-02 - version 2.0.0
- Performance when selecting sheets in large sheet sets.
- After Save the selection remain and the new values are seen in the Properties list.
- Added ability to edit the Sheet title, Sheet number and Include for publish.
- Export as tab separated text file that easily can be opened with Excel.
- Added Include for publish, Sheet title and Sheet number and corrected the Sheet Properties sort order to mach AutoCAD's.
- Open the sheet in the program that you have associated to open DWG files.
- Open the folder in Windows Explorer where the sheet DWG file is located in.
- Some minor bugs fixed.
- 2008-07-15 - version 1.1.0
- Now Shift can be used to select multiple sheets in the tree view.
- 2008-07-10 - version 1.0.1
- Bug fix related to some sheets that could not show the properties.
- 2008-07-08 - version 1.0
- First release